How to use
Step 1 - Dissolve one sachet in 240mL of distilled or commercially bottled or previously boiled & cooled down water at lukewarm or body temperature.
Step 2 - Tighten the cap and tube on the bottle securely. Place one finger over the tip of the cap and shake the bottle gently to dissolve the mixture.
Step 3 - Standing in front of a sink, bend forward to your comfort level and tilt your head down. Keeping your mouth open, without holding your breath, place the cap snugly against your nasal passage. Squeeze bottle gently until the solution starts draining from the opposite nail passage. Some may drain from your mouth. Do not swallow the solution.
Step 4 - Blow your nose very gently without pinching nose completely to avoid pressure on eardrums.
Step 5 - Repeat steps 3 & 4 for your other nasal passage. Most users find twice a day beneficial.
Step 6 - Clean the bottle and cap and air dry on a clean paper towel.
Ingredients
Safety
- Do not use tap water unless sterilized by boiling.
- For your safety, do not use tap or faucet water for dissolving the mixture unless it has been previously boiled for five minutes or more (and then cooled down) to lukewarm or body temperature, as boiling sterilizes the water. Other choices are distilled, micro-filtered (through 0.2 micron), reverse osmosis filtered, or commercially bottled water.
- Each device must be used only by one user; do not share this product with others.
- Follow the cleaning protocol after each use of the product. Cleaning instructions can be found in the enclosed brochure.
- Replace this device within three months of your first use.
- Rinse your nose gently.
———————————-
WARNINGS - Please read Warnings before using. Our recommendation is to replace the bottle every three months. Always read the label and use only as directed. If taking prescribed medication, consult your health professional before taking this product. If symptoms persist, seek professional medical advice.
